MATRIX 5000 / 6000 SERIES
MATRIX 5000 / 6000 SERIES HEADBOARD
INSTALLATION *
1. The headboard may come with four
pre-installed inserts - if not already installed,
assemble the four inserts into the outside of
the headboard as shown above.
2. Position a right (#1) and left (#2) mounting
bracket on the inside of the headboard with
headboard mounting holes facing outward
as shown above.
3. Align the bracket top holes with the
headboard top holes.
4. Insert a screw (#4) through each of the top
holes and bottom holes and screw into each
insert. Tighten loosely (hand tight) until after
brackets are fastened to the bed frame.
5. At the head deck end, slide the brackets into
the main frame rail hollow ends.
6.
FOR 80" BEDS:
Slide the brackets in until
the first bracket hole aligns with the upper rail
hole as shown above. 76" and 80" bracket
labels will be visible. Pin brackets to frame
with Clevis Pins and Hair Pins provided.
7.
FOR 76" BEDS:
Slide the mounting brackets
in until the second bracket hole aligns with
the upper rail hole as shown above. Only
76" bracket label will be visible. Pin brackets
to frame with Clevis Pins and Hair Pins
provided.
8. Tighten screws with the hex key included in
the kit.
GF Health Products, Inc. - www.grahamfield.com
Matrix Series Instructions for Use 999-0908-190A
MATRIX SERIES
A Graham-Field
®
Family Brand
12
