This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
*1516851_V1_1216_02_MH_m_4L_(1)
Operating elements
1
3
2
4
5
6
Operation
• Place the product with the feet (6) on a dry, level surface. Please note that the feet may leave
marks on certain surfaces. If necessary, protect the surface underneath the product with a
suitable cloth.
Keep the fan away from appliances that generate heat.
Do not place the fan under vases or flowerpots, otherwise water may drip into the
fan housing.
• Turn the fan off by turning the control wheel (5) to
0
. Insert the mains plug into a mains socket.
• Turn the wheel to the desired fan speed.
• There are three different speed settings:
1
= slow,
2
= medium,
3
= fast
• To turn off the fan, move the control wheel to
0
.
Cleaning
• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the casing or cause the fan to malfunction.
• Use a dry, lint-free cloth to clean the front (1) and rear (2) protective grille.
•
Remove dust from the air inlets on the back of the motor to ensure that there is a sufficient
flow of air to the motor.
• Do not allow water or other liquids to enter the motor or the interior components.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Operating voltage ......................... 220 – 240 V/AC, 50 Hz
Power consumption ...................... 34 W
Grille diameter .............................. 23 cm
Protection class ............................ II
Air flow
.......................................... 813 m³/h
Speed levels ................................. 3 (1250, 1450, 1650 rpm)
Cable length ................................. 180 cm
Operating/storage conditions ........ -5 to +45°C, 0 – 65% relative humidity
Dimensions (W x H x L) ................ 277 x 280 x 105 mm
Weight .......................................... 1330 g
1 Front protective grille
2 Rear protective grille
3 Fan Housing
4 Rotor blade
5 Control wheel
6 Feet (3x)
