![Base Varia User Manual Download Page 29](http://html1.mh-extra.com/html/base/varia/varia_user-manual_3999580029.webp)
29
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
• CHARGERS:
Mains powered chargers will operate within the temperature range of:
0 °C to 40 °C.
The chargers designed for your mobile phone meet with the standard
for safety of information technology equipment and office equipment
use. They are also compliant to the ecodesign directive 2009/125/EC.
Due to different applicable electrical specifications, a charger you pur-
chased in one jurisdiction may not work in another jurisdiction. They
should be used for this purpose only.
• RADIO WAVES:
Proof of compliance with international standards (ICNIRP) or with Eu-
ropean Directive 1999/5/EC (R&TTE) is required of all mobile phone
models before they can be put on the market. The protection of the
health and safety for the user and any other person is an essential re-
quirement of these standards or this directive.
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE
TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed
not to exceed the limits for exposure to radio waves (radio frequency
electromagnetic fields) recommended by international guidelines. The
guidelines were developed by an independent scientific organization
(ICNIRP) and include a substantial safety margin designed to assure
the safety of all persons, regardless of age and health.
The radio wave exposure guidelines use a unit of measurement known
as the Specific Absorption Rate, or SAR. The SAR limit for mobile de-
vices is 2 W/kg.
Tests for SAR are conducted using standard operating positions with
the device transmitting at its highest certified power level in all tested
frequency bands. The highest SAR values under the ICNIRP guidelines
for this device model are:
During use, the actual SAR values for this device are usually well
below the values stated above. This is because, for purposes of
system efficiency and to minimize interference on the network, the
operating power of your mobile device is automatically decreased
when full power is not needed for the call. The lower the power
output of the device, the lower its SAR value.
Maximum SAR for this model and conditions under which
it was recorded
Head SAR
UMTS 2100 + Wi-Fi +
Bluetooth
1,12 W/kg
Body-worn
SAR
GSM 900 + Wi-Fi + Bluetooth
0,603 W/kg