4
1. The "ON /OFF" Button
Installation
The area to be controlled should be sealed with a vapor barrier. If the equipment is installed in a
confined space, all vents should be sealed.
WARNING:
Do not install the dehumidifier in a corrosive environment. Some liquid vapor barriers
dry by "solvent evaporation". Always make sure the barrier is completelydry .
Step 1:
Place the dehumidifier on a level surface.
Do not place the dehumidifier directly on the vapor barrier. It is suggested to place the
dehumidifier on a level block or paver.
Wait for at least 12 hours before turning on the dehumidifier after delivery.
Step 2:
Set up the drain line.
Remove the nut from the drain nozzle before connecting the drain hose when using the
dehumidifier’s pump drain system.
To use the gravity drain system, locate the other drain nozzle on the side of the unit. Remove
the drain plug and connect the drain hose (with a larger inner diameter) onto the
other drain nozzle.
Step 3:
Plug the unit into a 15-amp ground circuit.
Key Functions
•
Press this button to turn ON/OFF the dehumidifier.
•
When the dehumidifier is turned off, there would be a 120 seconds delay on the fan. Do
not unplug the unit until the fan is off.
