Deseo Cresnet
Manual
6
/
17
v0.6
© 2020 basalte
3.4
Multitouch
A multitouch event occurs when the user simultaneously touches the upper and lower surfaces of
the device.
The short and long
multitouch can be enabled or disabled in the ‘
Basalte Deseo Configuration
’
module. The delay for the multitouch long press is adjustable from 0.5 s to 5.0 s.
3.4.1
Short Multitouch
When a
multitouch action is shorter then the ‘long press delay’, a multitouch sho
rt press is triggered.
The installer can set dynamic text fields which are displayed shortly when the multitouch occurs.
The message is adjustable by sending a serial string to the <Multitouch_Short_Message$> input.
After the multitouch is triggered there is a brief time to update the text string before it will be
displayed.
3.4.2
Long Multitouch
When the multitouch action is longer then the ‘long press delay’, a long multitouch is triggered.
Identically to the short multitouch, the installer can send a text string to the
<Multitouch_Long_Message$>. The text will display when the multitouch long press is triggered.
3.5
Thermostat modes
In the configuration module it is possible to enable the following thermostat modes:
Heating , Cooling
, Heating Cooling Auto
When touching and releasing the right sensor, the Deseo will cycle through the different modes if
they are enabled (off, heating, cooling, auto).
If the mode is changed by touching the mode sensor, the corresponding digital output join will be
pulsed high.
<
Mode_Heat
>
<
Mode_Cool
>
<
Mode_Auto
>
<
Mode_Off
>
All thermostat modes can be activated from the Cresnet bus by sending a pulse to one of the
corresponding digital input joins.
<
Mode_Heat_FB
>
<
Mode_Cool_FB
>
<
Mode_Auto_FB
>
<
Mode_Off_FB
>
