Basalte Deseo Cresnet, Manual

Page: 11 / 17

Deseo Cresnet
Manual
11 / 17 v0.6 © 2020 basalte
Digital inputs:
< IsHeating >
Indicates that the system is heating. A high signal will highlight the
flame symbol in heating mode.
High/1 = Heat running; Low/0 = System not running
Digital inputs:
< IsCooling >
Indicates that the system is cooling. A high signal will highlight the
snowflake symbol in cooling mode.
High/1 = Cool running; Low/0 = System not running
Digital inputs:
< Fan_Low_FB >
< Fan_Mid_FB >
< Fan_High_FB >
< Fan_Auto_FB >
< Fan_Off_FB >
Selects the fan mode on the rising edge of the input. The fan state is
visible in the upper left corner of the display.
High/1 (rising edge) = Select fan mode; Low/0 = no effect
Digital outputs:
< Fan_Low >
< Fan_Mid >
< Fan_High >
< Fan_Auto >
< Fan_Off >
Reports the current fan mode after the fan mode button is pressed.
High/1 = Fan mode selected; Low/0 = Fan mode not selected
Analog input:
<
External_Temperature >
Receives the room temperature from an external sensor. If enabled in
the
‘ Basalte Deseo Configuration ’ module the temperature can be
displayed on the start screen of the Deseo.
This value is ignored if the internal sensor is used.
Analog output:
< Internal_Temperature >
Reports the ambient room temperature in tenths of a degree Celsius
or Fahrenheit.
Depending of the report type, the temperature will be updated every
60 seconds, or on every temperature change of 0.5° Celsius. (equal to
0.9° Fahrenheit)
The temperature format and report type can be set using the ‘ Basalte
Deseo Configuration ’ module.