![background image](http://html1.mh-extra.com/html/bartscher/top-juicer-150-145/top-juicer-150-145_original-instruction-manual_4039708019.webp)
Installation and operation
150145
17 / 22
EN
The squeezed fruit or vegetable juice flows out of the juice spout pipe in the sieve
base and is collected in the plastic beaker. The pulp is separated and collected in
the pulp container.
Fruit or vegetables may be added provided that the plastic beaker or the pulp
container are not full.
7. Remember to place the plastic beaker with splash-guard under the juice spout
pipe in the sieve base when squeezing the juice.
8. Observe the filling level of the pulp container when squeezing the juice.
9. Switch the appliance off, when the pulp container is full.
10. Empty the pulp container.
ATTENTION!
Overfilled pulp container may cause the appliance cease to operate
correctly. The pulp excess that gets into the motor housing may be the
cause of damage.
Observe the condition of the pulp container and empty it regularly!
ATTENTION!
As a rule, the appliance should never be operated without breaks for more
than 3 minutes. After 3 minutes of continuous operation the appliance
should be left to cool down for approx. 20 minutes before subsequent
operation.
11. If the indicated time of 3 minutes is not enough to complete the squeezing of
juice, switch the appliance off (rotate the speed level switch to
'0'
). Leave the
appliance to cool down before the squeezing process is continued.
12. When the squeezing process is finished, switch the appliance off and disconnect
it from mains socket (pull the plug out).
Summary of Contents for Top Juicer 150.145
Page 1: ...Top Juicer 150145...