Installation and operation
150145
15 / 22
EN
Assembly
CAUTION!
Please remember to disconnect the appliance from mains supply socket,
when it is not in use or some of its components are removed or
disassembled.
When assembling, follow figure 2.
1. Place the basic unit / motor block (1) on a
soft an even surface.
2. Press the base unit / motor block (1) firmly
to the surface, so that feet's suction cups
are well fixed.
3. Assemble the pulp container on a suitable
holder in the base unit / motor block.
In order to clean the pulp container easier,
you may fit it with a foil bag.
4. Insert the sieve base (11) onto the base
unit / motor block (1), so that the pulp
discharge is located over the pulp
container.
5. Insert the sieve basket (8) carefully in the
sieve base (11) and press it, until it
engages.
Fig. 2
WARNING! Injury hazard!
Blades in the sieve basket are very sharp.
Exercise proper caution when inserting the sieve basket.
6. Next, insert the lid (5), making sure at the same time that the filling shaft (4) is
over the basket (8).
7. Then, pull the locking bow (2) over the lid (5). Latch it in nest at both sides of the
lid (5).
ATTENTION!
The appliance operates only when all components are correctly fitted, and
the locking bow with safety element is engaged with the lid.
Summary of Contents for Top Juicer 150.145
Page 1: ...Top Juicer 150145...