46
If the burner should not remain ignited,
hold the knob down for
longer
, thus allowing the safety valve to heat up�
The oven door must remain open until the burner has ignited� To do
this, check the presence of a flame through the said hole
1
(
Fig. 12
)�
When the burner has ignited, close the oven door slowly to prevent the
flame going out and take the knob to the desired temperature.
OVEN ELECTRICAL SWITCH-ON (where envisioned)
If the oven has electric switch-on, it is essential to open the door
completely, press the knob relative to the oven thermostat and turn it
anti-clockwise and release it when the burner has ignited� Close the door
again slowly�
Attention!
If the door is not completely open, power on will not function�
Once the temperature set has been set, the thermostat will automatically
take the burner to minimum, in a way to maintain the temperature inside
the oven constant�
If the flame is switched off accidentally during use, the safety valve
blocks the supply of gas after approx� 40 seconds�
Attention!
As envisioned by the regulations, a device prevents the simul-
taneous use of the oven gas burner and the electric resistor of
the grill.
Description:
1
- Oven power on hole (manual)
2
- Smoke deflectors for use of the
grill
2
1
Fig. 12
1