- 32 -
CAUTION!
Do not place any empty cookware on the cooking zone. Heating an empty pot or
pan activates the overheating protection, a signal sounds and the device turns off.
The display shows the error message „E05“.
In this case, disconnect the device from the mains outlet and let it cool down for a
few minutes.
After that the device works again without difficulties.
•
Ensure that the cookware used will not scratch the surface of the heating plate,
although this should not negatively affect the unit’s functioning.
•
When cooking or heating is finished, remove the plug from its socket (do not
rely solely on the sensory function)!
6. Cleaning and maintenance
6.1 Safety advice
o
Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o
Do not use any acid agents and make sure no water ingresses the device.
o
To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!
6.2 Cleaning
o
The device should be cleaned regularly.
o
Wipe off the cooking zone with a damp cloth or use a mild, non-abrasive soap
solution.
o
Wipe off the operating panel with a soft cloth or a mild detergent.
o
Use soft cloth only and make sure you never use any kind of abrasive agents or
pads, which could scratch the surface.
o
After the cleaning procedure you should use a soft and dry cloth to wipe dry and
polish the surface.
o
Make sure the device has been cleaned and dried properly for further usage.
Summary of Contents for IK 30
Page 2: ... 2 ...