- 71 -
Preheating
To turn the device on, press the button
T1
.
The function buttons
T 2 – T 3 - T 4
will flash, and
the device is ready to accept function settings.
The LED display
D 4
will read "MANUAL".
To select the desired cooking/baking mode
press the corresponding button:
T 2
or
T 3
or
T 4
and set the desired parameters.
Pre-heating is turned off in basic settings.
To activate pre-heating, press button
T 11,
and
turn dial M to the left. The LED display D 4 will
read
"
PRE? N" (N – no).
Turn dial
M
to the right, until the LED display
D 4
reads "PRE? Y" (Y – yes).
To confirm, press dial
M
. Turn dial
M
to the right
in order to return to programming the recipe.
If we activate the cooking programme by
pressing button
T 16,
the LED displays
D 3
and
D 4
will read
"
PRE"
and
"
HEAT"
.
After pressing
T 16
button the oven will automa-
tically begin preheating at a temperature 20%
higher than the set for the first phase of cooking.
Once the pre-heating process is complete, an
acoustic signal sounds. Now the food may be
placed in the oven for cooking.
Note:
For best results, the food should always be
placed in the oven compartment the when
preheating is completed.
In addition, the pre-heating can always be
used when the power of the oven is to be
increased (with some specific exceptions where
the cooking needs to be started at "cold").
T 2
D 4
M
T 1
T 4
T 3
T 16
T 11
