- 29 -
Sending data / printing function
•
If the electronic digital scale is to be integrated with the computer system, the
RS 232 connector allows for data transfer from the weighing operation.
•
Press and hold
for 2 seconds, the acoustic signal is emitted and data from the
weighing operation are sent from the CPU to the connected computer or printer.
Counting mode (number of pieces)
•
That function of the digital scale allows for determination of number of pieces in one
sample. The number of pieces is determined upon the basis of known weight of a
single piece.
•
Remove all objects from the weighing surface and press
to set the device to “0”.
•
press
until the device switches to “pcs” mode and the display shows
“ADD10”.
•
By pressing
it is possible to set the number of pieces (20, 50, 5).
•
Place the number of pieces corresponding to the setting (5, 10, 20, 50) on the
weighing surface.
Caution: the weight of each piece must be higher from the minimum allowable partial
weight, otherwise the display shows symbol “no”.
The pieces weight must be identical.
•
Press
in order to calculate the unitary weight and save it in the memory.
•
Remove the weighed objects from the weighing surface. The digital scale is now set for
calculating the objects of the same unitary weight.
•
Place the objects to be counted on the weighing surface. The digital display shows
number of pieces of a given object.
•
In order to count another number of a given objects press
.
If the counting
operation is to be terminated, press
to stop the counting mode and the scale
saves the last value used for counting.
