![background image](http://html.mh-extra.com/html/bartscher/900004/900004_instruction-manual_476672026.webp)
- 51 -
Problem
Possible reason
Solution
Water leaks
from the
water tank
Too high temperature
Set lower temperature
Damaged seal of the
water tank
Contact the service company
Water level exceeds
MAX
mark
Wait for the device to cool down
and drain water excess to obtain
its correct level
Drink leaks
at the
container
bottom
The container is not
installed correctly
Empty the container, remove it and
reinstall according to section 6.2.7
Damaged seal of
container bottom
Contact the service company
The
overheating
protection
was
triggered
Water level in the water tank
is below minimum
Fill the tank with water up to
MAX
level,
press
Reset
button (section 5.2)
and restart the device
No water in the water tank
Fill the tank with water up to
MAX
level,
press
Reset
button (section 5.2)
and restart the device
When the anomalies cannot be removed:
-
disconnect the device from the socket (pull the plug!)
-
do not
open the housing,
-
contact the vendor.