![background image](http://html.mh-extra.com/html/bartscher/900004/900004_instruction-manual_476672025.webp)
- 50 -
Empty the water tank, (section 6.2.11).
Thoroughly rinse the tank by filling it with water and draining for a few times
(section 6.2.11).
6.2.13 Maintenance
CAUTION!
The device must be periodically (at least once a year) inspected by the
qualified technician. Regular inspections are aimed for maintaining safety of
installed parts and the device itself. Replace worn parts only with original
spare parts.
Do not use the device when even one part is damaged or worn.
7. Possible Malfunctions
Problem
Possible reason
Solution
The device
does not
heat
No voltage
Correctly connect the plug
to the socket
Switch in OFF position
Put the switch in ON position
The overheating protection
was triggered
Press
Reset
button (section 5.2)
The temperature controller
knob in "0" position
Set required temperature
The stirrer
does not
rotate
No voltage
Correctly connect the plug
to the socket
Incorrectly installed stirrer
Remove the stirrer and reinstall it
according to section 6.2.6
Motor problem
Contact the service company
Switch in OFF position
Put the switch in ON position
The outlet
tap is
untight
The outlet tap is
incorrectly installed
Empty the container, remove and
reinstall the tap (sections 6.2.1 -
6.2.7)
Contaminated outlet hole
and rubber seal
Empty the container, remove and
disassemble the outlet tap, clean it
thoroughly, assemble, and reinstall in
the device (sections 6.2.1 - 6.2.7)
Damaged seal
Contact the service company