- 39 -
NOTE!
When the products placed in the refrigerator are too cold, set the temperature
control to position
1 – 3
. When they are too warm, set the temperature control
to position
3 – 5
.
CAUTION!
Temperature in the refrigerator may vary depending on the environment
temperature, amount and temperature of food products, and frequency of the door
opening.
When the environment temperature is low, the device cools weaker, therefore temperature
inside may rise. It is then required to decrease temperature with use of control.
Tips for the user
•
When placing items inside, ensure that air can circulate freely inside the device.
•
The more items in the refrigerator and the longer the door is kept open, the greater
the energy use.
•
To reduce loss of cold, keep the door open for just a short time. Moreover do not
open the door too often.
•
Products stored inside should be cooled in advance to the required temperature.
•
Placing warm products into the refrigerator can negatively impact the device’s
functioning and products already cooled. In order to avoid the losses of cooled air
in the refrigerator avoid storing of food products in non-cooled rooms.
•
Do not store bananas in the refrigerators as they are sensitive to cold.
•
The food products of specific aroma, like fresh fish, foie gras, or cheese, should
be stored in tight containers.
•
In the event of a power failure, avoid opening door if possible in order to avoid
cold loss.
•
The refrigerator should not be left without power for longer than 10 minutes.
•
After a power outage or disconnecting the refrigerator, do not connect the device
to a power supply for at least 5 minutes.
•
When the device is to be switched off for a longer time, leave the door opened.
Summary of Contents for 700270 LN
Page 2: ......