Bartscher 700270 LN, Instruction Manual

Page: 34 / 112

- 32 -
5. Installation and operation
5.1 Safety instructions
•
Never allow the power cable to come into contact with heat sources or sharp edges.
The power cable should not hang over the side of the working surface. Ensure that no
one can step on or trip over the cable.
•
The power cable must not be folded, bent or tangled, and must always remain fully
unrolled.
•
Never place the device or other objects on the power cable.
•
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
•
Do not use the device in case it does not function properly, has been damaged or
dropped.
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
•
Do not store heavy, poisonous or corrosive materials or objects inside the device.
•
Do not place any electric devices on the refrigerator, like microwave ovens, hair dryers,
irons, kettles, etc. There is a risk of combustion of plastic elements.
•
Do not drill holes in the device and do not mount any objects on it.
•
Attention! During transport, protect the device from atmospheric conditions (rain,
snow, humidity).
•
Do not allow any element of the cooling system (e.g. compressor) to be damaged, as
this may lead to leakage of the coolant.
WARNING!
In the event of coolant leakage, disconnect the device from its power source by
removing the plug from its socket and contact a service centre.