Bartscher 296.305, Installation - Use - Maintenance

Page: 23 / 91

Pag. 23
WARNINGS
General
•
Read the instructions carefully before installation, use and maintenance of the appliance.
•
Installation must be carried out by qualified personnel following the manufacturer’s instructions
in the specific manual.
•
The appliance must only be used by trained personnel and only for the intended use.
•
In the event of breakdown or malfunctioning, switch off the appliance and call in after sales
assistance only from an authorized centre.
•
Use only original spare parts; otherwise no liability is accepted by the manufacturer.
•
The appliance must not be washed with high pressure water sprays, neither must the openings or
be blocked.
ATTENTION! The manufacturer declines any liability for damage caused by wrong
installation, tampering, making unauthorized changes, improper use, poor maintenance,
installation of non-original spare parts, not observing local norms, incorrect use or not
observing the instructions in this booklet
For the installer
•
The functioning of the appliance must be explained and shown to the user. After having made
sure that everything is clear, the instruction booklet must be handed over.
•
The user must be informed that any building modification or restructuring that may in any way
modify the air supply necessary for combustion, makes it necessary to carry out another check of
the functionality of the appliance.
TECHNICAL FEATURES
The following instructions for starting up and functioning refer to gas and mixed appliances
belonging to category I
3B/P
, II
2H3+
, II
2H3B/P
, II
2L3B/P
, III
1ab2H3B/P
, III
1a2H3B/P
with a power pressure for
Butane (G30) of 28/30mbar, for propane (G31) of 30/37 mbar, for Methane (Natural Gas) (G20-
G25) of 20/25 mbar and for town gases (G110 – G120) of 8 mbar. The data plate (fig. 5 – pag. 4)
with all the information to refer to regarding the appliance, is situated inside the right or left side of
the control panel, depending on the model.
The appliances have been checked in accordance with the European norms below.
2006/95/CE - Low Tension (LVD)
CEE 2004/108 - Electromagnetic Compatibility (EMC)
90/396/EEC - Gas Appliances
98/37/EC - Appliance to the directives
And the particular reference norms.
Declaration of compliance
The manufacturer declares that the appliances of their production are compliant with the above
mentioned EEC norms and requires that installation be done observing the norms in force,
particularly regarding the system for letting out fumes and air exchange.