Installation and operation
271107
17 / 22
EN
The fan speed control is executed alike, with the use of the rotary controller on the
front panel.
The rocker switch marked with
provides for the possibility of switching LED
lighting ON and OFF, irrespective of the position of fan speed regulator.
NOTE!
Information about other settings of the fan speed regulator are provide in
the manufacturer's instruction manual.
5.2
Operation
•
Prior t o firs t operation, cl ean the appli anc e and its equi pment ac cor ding t o i nstr ucti ons in
sect ion 6 'Cl eaning'
. Make sur e no water enters el ectric i nst allation and connec tion box. T hen thoroughl y dr y the appli anc e and t he entire eq uipm ent.
•
Ins ert t he bott om c over int o the applianc e. The c over acts as a spac er bet ween t he heating element and l ef t-over f ood tray.
•
Caref ull y i nser t t he c onnection box wit h the heati ng element at t he bac k edge of t he applianc e. A pin in bott om par t of t he c onnecti on box must ent er a hol e i n t he mai n applianc e. This way t he connec tion box is properly mount ed.
Preparation of the Appliance
1. Before use, clean the appliance, observing instructions in section 6
'Cleaning'
.
2. Dry the appliance thoroughly.
Operation of the Appliance
1. Switch the appliance on with the installed disconnector.
The extractor hood is switched on. Vapours are vented during preparation of food
and exhausted by the exhaust air installation.
2. Use the fan speed regulator to set the required motor speed.
3. If needed, switch the LED lighting on, using the lighting switch, and setting it to
'I' position.
4. When the LED lighting is no longer needed, set the lighting switch to 'O'
position.
Switching the Appliance Off
1. When the appliance is not to be used any more, it should be switched off with
the installed disconnector.
