EN
page 33
USER SECTION
8. ENVIRONMENTAL FEATURES
8.1 Packing
The packing consists of the following:
•
a wood pallet;
•
a nylon bag (LDPE);
•
multi-layered cardboard;
•
polyurethane foam (PS);
•
polypropylene support (PP).
We kindly advise you to dispose of the above-mentioned material in accordance with current environmental
regulations.
8.2 Disposal
The use of the WEEE Symbol indicates that this product may not be treated as householdwaste.
By ensuring this product is disposed of correctly, you will help protect the environment. For
more detailed information about the recycling of this product, please contact your local authority,
your household waste disposal service provider or the shop where you purchased the product.
For the disposal of the machine or one part of its, please follow the directives 2011/65/UE, 2012/19/UE and
following changes and/or the legislative decrees of application.
This product or parts of it cannot be disposed of as domestic waste but must be treated by means of separate collection
(see barred waste container symbol on product).
At the time of product disposal, the user must refer to the specifi c waste collection systems for electric and electronic
appliances (WEEE).
The manufacturer guarantees the absence of dangerous substances in the EEE’s used in compliance with the 2011/65/UE
Directive.
In the case of failure to comply with that prescribed, the user will be subject to the sanctions envisioned by the individual
European Community member.
Disconnect the machine from the electrical and water supply before disposal.
Cut off the electrical cable in order to make any other use impossible.
All the metal parts are recyclable as they are in stainless steel.
Recyclable plastic parts are marked with the symbol of the plastic material.
9. ECOLOGICAL FEATURES
9.1 Recommendations for optimum energy, water, and additive consumption
Dispensing of salt: A pre-set quantity (by the manufacturer) of salt is injected in the resins every regeneration
cycle. It is important to observe the number of regeneration cycles recommended in paragraph
5.5
in order to
avoid salt spills or lime deposits.
If possible operate the machine at full capacity: Thus avoiding a waste in detergent, rinse aid, and electrical and
water consumption.
Detergents and rinse aids: Out of respect for the environment, use detergents and rinse aids with the highest biodegradability.
Check the correct amount according to the water hardness at least once a year. An excessive amount of the product will
pollute rivers and seas, an inadequate quantity will preclude proper washing and/or cleanliness of the dishes.
Temperature of the tub and boiler: The temperature of the tub and boiler are set by the manufacturer in such a way as to
ensure the best washing results from the majority of detergents on the market. These may be re-set by the installer according
to your detergent (see par.
1.5
).
TYPE OF ALARM
CAUSE
REMEDIES
Flashing of the cycle lamp Missed refi ll of water in the wash-tank Verify the full opening of the water inlet valve or the right
positioning of the overfl ow pipe. Switch the machine OFF
and ON to reset the alarm
Missed heating of the water boiler (in
machines equipped with Thermostop)
Boiler thermostat or boiler heating element out of order.
Check them or call for Service
Flashing of the softening
lamp
Missed tank emptying
remove the overfl ow pipe and drain the tank. Switch the
machine OFF and ON to reset the alarm
7. ALARMS