BARTINGTON INSTRUMENTS
Page 7 of 20 OM2448/4
5.1. Back Panel Connections and Controls
1.
X Signal Conditioned Output (BNC connector)
2.
Y Signal Conditioned Output (BNC connector)
3.
Z Signal Conditioned Output (BNC connector)
The three BNC connectors carry the conditioned analogue output voltages. The conditioned
outputs are the magnetometer X,Y and Z signals after they have been modified by the low/high-
pass filters.
4.
Space for unique serial number
5.
Magnetometer socket for the connection of the magnetometer cable
Note:
Ensure correct orientation of the connector (indicated by the cut-out on the
connector body aligning with the notch in the socket).
4
5
3
2
1
