BARTINGTON INSTRUMENTS
Page 11 of 16
Cause of failure
Solution
Power supply
as detailed in Pre-Installation Tests.
Cables
as detailed in Pre-Installation Tests.
Power Input
If no fault can be found in the power supply or cables, ensure
the cable length is not too long, causing excessive voltage drop
between the power supply and magnetometer. Refer to the
specifications defined in the product brochure.
Magnetometer
In the event of any apparent malfunction, email
or telephone the Bartington Instruments service
team on +44 (0)1993 706565. Attempted repair or opening of the
casing by users may invalidate the warranty.
A re-calibration service is available which is traceable to
international standards.
For information about disposal of the damaged unit, refer to
.
8. Care and maintenance
8.1. Cleaning the Mag585 and Mag592
Use water and mild soap to remove grime from external enclosures.
Caution:
Never use chemicals, such as solvents, when cleaning the Mag585 and Mag592.
Caution:
Take particular care when cleaning around electrical connections. Bent or
damaged pins may cause the magnetometer to malfunction.
8.2. Calibration
Return the Mag585 and Mag592 to Bartington Instruments for calibration at the recommended
intervals. Refer to the Calibration Certificate for further details.
