AQUALUC
C:URVE mini –
INSTALLATION AND OPERATING INSTRUCTIONS
MADE IN
GERMANY.
Thank you for choosing this high-quality product from Barthelme!
1. GENERAL INFORMATION FOR INTENDED USE
Please read these instructions carefully prior to installation and initial operation of the LED light line
and keep in a safe place. Should you pass this LED light line on to a third party, please also include these
instructions.
This product is a high-quality flexible LED light line with protection class IP67. Amongst other things, it is
resistant against environmental influences. The high quantity of copper in the circuit paths, the current
limiter and the thermal conductive coating ensure high quality and a long lifetime.
The AQUALUC C:URVE mini is only to be used for lighting purposes and may not be changed or modified in
any way which is not described in these instructions. Please note the areas of application and possible uses
in point 4. Non-observance of these instructions may inhibit the correct functionality or cause damage to
the product. In this case we do not assume any liability.
ATTENTION
The minimum bending radius of the AQUALUC C:URVE mini is 50 mm.
The minimum bending radius may not be exceeded and the light line may not be bent,
otherwise the AQUALUC C:URVE mini could be damaged!
Please observe the bending DIRECTION of the light line (see illustration 2).
Any warranty will be void in case of non-compliance.
