Bartell Global POWER BUGGY DB17, Owner'S Manual

Page: 18 / 24

DB17, DB21
OWNER'S MANUAL
17
OIPB-B19034
SHUTDOWN INSTRUCTIONS
Correct shutdown is important; follow these steps for safe operation.
1.
Come to a full stop.
2.
Set parking brake.
3.
Idle engine for gradual cooling.
4.
Shut off engine.
5.
Cycle hydraulic controls to eliminate residual pressure.
6.
Remove ignition key on electric start models.
7.
Block wheels if on a slope or incline.
If the buggy will be exposed to wet freezing weather for a period of time, the concrete tub
should be placed in the dump position so that water does not collect with the possibility of
freezing and breaking the tub.
LIFTING
Single Point Lifting:
When lifting buggy with the single point lift ring, the bucket must be in the
dumped position and both lift ring support arms must be attached with
retaining rings as shown.
Fork Lift Loading:
The buggy can be loaded from either side or from the rider end using the
fork lift pockets provided.
TRANSPORT
When transporting the buggy on a truck or trailer, know the overall height to avoid
contacting overhead obstructions such as bridges, power lines, etc. Make sure all tie-
downs and blocks are in place and bucket is completely lowered and securely latched. If
our buggy is to be hauled by truck, check truck and ramp capacities.