Bartell Global POWER BUGGY DB17, Owner'S Manual

Page: 14 / 24

DB17, DB21
OWNER'S MANUAL
13
OIPB-B19034
Function Test
After engine has warmed to operating temperature make the following checks:
1. In a level, open area, with the Parking Brake engaged, check for free speed control
operation. If operation of Speed Control is not free, do not attempt to operate buggy until
corrected.
2. Set engine at idle, with Parking Brake engaged, slowly activate speed control slightly, for a
short period of time to test the Brake holding capacity. If the Power Buggy will move, adjust the
Brake in accordance with the maintenance and adjustment instruction. If the Power Buggy does
not move, release the speed control and disengage the Parking Brake. If Buggy tends to creep,
adjust the pump control lever until the creeping is eliminated.
3. At a slow speed, operate Buggy and become familiar with its Speed Control operation, Brake
operation, and Steering.
Worksite Inspections
Check the Entire Area. Inspect the entire surface over which you will travel. Look for holes, drop
offs and obstacles. Look for rough spots. On docks, ramps or floors look for weak spots. Look
for oil spills, wet spots and slippery surfaces. Look for soft soil, deep mud and standing water.
On rough terrain or slopes, watch for anything that might make you lose control or cause the
buggy to tip over. Inspect the grade of the path you will travel. The maximum permissible grade
upon which the Power Buggy may be used is 10% (6°), The track Buggy may be used up to
20%. See next page on how to determine the grade.
HAZARD: SKIN INJECTION HAZARD! Use a piece of cardboard to check for hydraulic
hose leaks. DO NOT USE YOUR HAND. If fluid is injected under the skin, it can cause
gangrene. GET MEDICAL HELP IMMEDIATELY.
HAZARD: EXPLOSION AND BURN HAZARD! Will cause death, burns or blindness due
to ignition of explosive gases or corrosive acid. Keep all open flames and sparks
away. Wear personal protective equipment, including face shield, gloves and long
sleeve shirt.