RAMMER
OPERATOR’S MANUAL
20
OI-B19026
MAINTENANCE
•
DAILY
•
Remove oil and dirt thoroughly from the engine and control area.
•
Clean or replace air filter as necessary.
•
Check and retighten all fasteners as necessary.
•
Check protective sleeve, bellow, and engine for oil leaks. Repair as needed.
•
Remove element from pre-filter at the top of crankcase and clean it with air.
SERVICE
Refer to the engine owner’s manual for engine maintenance and service procedures.
REPLACEMENT OF LUBRICANT (BODY)
•
Remove the drain plug at the rear of the rammer foot and drain dirty oil. Refill with SAE
10W-30 oil (20W-50 for BR68) to the middle of the sight glass.
•
The oil change interval is 50 hours after first operation. After that, oil should be changed
following every 200 hours of use.
CLEANING
THE
AIR
FILTER
ELEMENT
•
Air filter should be cleaned after every 200 to 300 hours of use.
•
Remove the air filter element from the top of the crankcase.
•
Use detergent solution to wash the element.
•
Shake out excess moisture and dry the element.
Summary of Contents for BR68
Page 28: ......