Bartell Global BR68, Owner'S Manual

Page: 13 / 28

RAMMER
OPERATOR’S MANUAL
12
OI-B19026
•
Wipe away all fuel spills with a clean cloth. Keep gasoline, kerosene, matches,
and other explosive inflammables away from the engine, because the
temperature around the exhaust muffler is very high during operation.
•
Operate the engine on as level a surface as possible. The allowable inclination of
the engine for continuous use is 20 degrees. There may be fuel spillage and/or
lube oil pressure problems if the engine is tilted beyond that limit.
•
Do not put the engine or the engine-mounted machinery indoors while the engine
is still hot.
Preventing Burns
•
Never touch the muffler, muffler cover or engine body while engine is running or
hot.
Preventing Injury
•
Use the correct tools and equipment.
•
Adopt correct posture while carrying heavy load or lifting the machine.
•
Adopt correct position to service the machine.
•
Dispose or contain the waste engine and rammer lube properly. Wipe clean the
work area if lube is spilled on the ground. A slippery work area is dangerous.
ENGINE SAFETY
Please refer to the
engine’s operation manual.
SHUTDOWN SAFETY
Emergency Shutdown:
An “ON” “OFF” switch can be found on the engine. To stop the machine immediately, toggle the
switch from the “ON” position to the “OFF” position.
Normal Shutdown:
Move throttle quickly from OPERATING position to IDLE position and run engine for 3 to 5
minutes at low speed to allow it to cool. After the engine is cool, it can be turned off in one of
two ways:
1.
Toggle the switch on the engine to the “OFF” position.
2. Close the fuel valve.