Bartell Global BR68, Owner'S Manual

Page: 17 / 28

RAMMER
OPERATOR’S MANUAL
16
OI-B19026
CAUTION
•
NEVER attempt to fill the fuel tank when the engine is running or hot.
•
Do not smoke or allow flames or sparks in the area where engine is refueled
or where fuel is stored.
•
Do not overfill the fuel tank. If any fuel is spilled, make sure that the area is dry
before starting the engine.
•
The engine may be damaged if operated with insufficient oil. It is also
dangerous to supply too much oil to the engine because a sudden increase
in engine RPM may occur and the oil temperature will become dangerously
high. Always check the oil level before starting the engine and refill if
necessary.
3. Fasteners
a. Check all nuts, bolts and fasteners for tightness. Retighten if necessary.
Operating a damage to part(s), consequently shortening the lifespan of the
machine.
4. Cleanliness
a. Check for leakage of lube oil from the engine and protective sleeve. If there is
leakage, wipe clean and start running for a few minutes. If the problem persists,
refer to troubleshooting section.
b. Clean the recoil starter and foot so that it is dirt free.
c. Wipe the entire unit clean before operating.
5. Missing Parts
a. Check for and replace missing parts. If parts are excessively worn, replace with
new ones. Replace any missing or damaged Safety/Operation decals.
CAUTION
•
Engine parts are hot after operation.
•
If the machine needs to be restarted immediately after stopping, gloves should
be worn to prevent burns.
Oil Fill Port
Figure D