Bartell Global BR68, Owner'S Manual

Page: 15 / 28

RAMMER
OPERATOR’S MANUAL
14
OI-B19026
AIR CLEANER
HANDLE
SHOCK ABSORBER
BELLOW
PROTECT SLEEVE
FOOT
FUEL TANK
THROTTLE LEVER
RECOIL STARTER
DRAIN PLUG (ENGINE)
OIL LEVEL SIGHT GLASS
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text subheadings therein before set-up or use of this product.
RAMMER OPERATING PROCEDURE
It is necessary to be familiar with the operating procedure before handling the rammer. The
procedure is as follows:
1. Pre-Check
2. Starting
3. Operating
4. Stopping
Below is a diagram that gives a general introduction to the machine parts.
Figure A: Parts of Bartell Rammer
Figure A shows all the essential parts that the user must be familiar with before
operating the rammer.
WARNING: Risk of accidental starting; resulting in serious personal injury. Turn the
Fuel Valve of the tool to its “OFF” position and remove the spark plug before making
any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.