Operation
POLARIS SMART HMI
- for Zone 1/21
POLARIS Smart HMI 7” W
EN 44/54
Technical data subject to change.
04/2018
Illustration 17:
Successful closure of the recovery process
After the new start of the device the operating system partition is active again and this
restored operating system is begun.
The first start (so called: Ridge time boat) of the put back operating system can last
some minutes. On this occasion, it is about two phases. During the first phase
components of the device are recognised the hardware and are integrated into the
operating system. During the second phase the final settings are put. Between the
phases or within the phase the device is automatically restarted several times.
8.1
Recovery/Backup Function
The POLARIS can be restored to delivery status by means of a recovery stick.
The recovery flash drive is not included in the scope of supply.
It can be ordered from the contact address www.bartec.de
The recovery flash drive contains the functions:
-
image recovery (factory reset) flash drive
-
backup
-
restoration
Summary of Contents for POLARIS SMART HMI 17-71V6-1 Series
Page 2: ......
