Basic
safety instructions
POLARIS SMART HMI
- for Zone 1/21
POLARIS Smart HMI 7” W
EN 4/54
Technical data subject to change.
04/2018
1.6.2
Maintenance
Regular servicing is not necessary if the equipment is operated correctly in accordance
with the installation instructions and environmental conditions. In this context, please refer
to Chapter "Maintenance, Inspection, Repair".
1.6.3
Inspection
Under EN/IEC 60079-17 and EN/IEC 60079-19, the owner/managing operator of electrical
installations in hazardous areas is obliged to have these installations checked by a
qualified electrician to ensure that they are in a proper condition.
1.6.4
Repairs
Repairs on explosion-protected operating equipment may be done only by authorised
persons working in accordance with the latest developments in technology and using
original spare parts. The applicable regulations must be observed.
1.6.5
Commissioning
Before commissioning, check that all components and documents are there.
1.7
Ex protection type, certification and standards
Markings specifying Ex protection and certification are put on the device. For Ex
protection markings, see chapter 4 "Technical Data ".
The POLARIS SMART HMI conform to Directive 2014/34/EU for devices and protective
systems for use to their intended purpose in potentially explosive areas (ATEX Directive).
For the standards conformed to, see chapter 3 "Explosion protection and approvals".
1.8
Warranty
WARNING
If components other than those specified are used, protection against explosion
can no longer be assured.
Do not take any modifications or conversions on device.
Use only original spare parts parts.
The manufacturer grants a complete warranty only and exclusively for the spare parts
ordered from him, the manufacturer.
Summary of Contents for POLARIS SMART HMI 17-71V6-1 Series
Page 2: ......
