Delivery mode
23
Aircraft Refuelling, Operating Instructions, BA 090323, (07.03.2022)
If an additive product was selected in the order function and a meter other than meter 1 was then
selected in the “Select Meter” window, no delivery can be started; the “Start delivery” softkey is not
displayed.
An error dialog appears allowing you to choose between cancelling the order and returning to the meter
selection window.
If two meters have been activated for delivery using the numerical keys, it is not
possible to select an additive product.
Additive products (products with additives) can only be submitted at Measuring
point 1 if they are submitted individually.
4.3.2 Preset quantity
Configuration-dependent may be entering of a preset quantity: -prohibited, -permitted
or
–required. When entering a preset quantity is required, but the order data contain no quantity, you
must enter a quantity >0 to start a delivery.
(Configuration: Sequence Controls Menu /Meter Controls Parameters/Preset Enter at Order)
Select the line „Preset Quantity“ and enter an appropriate quantity
