Feature Enhancements
67
Aircraft Refuelling, Operating Instructions, BA 090323, (07.03.2022)
BARTEC- Interface
Dialog request
This function sends a dialog request to the dispatcher.
7.2
Check Interlock inputs
The states of the interlock sensors installed on the vehicle appear in the "Interlocks" window. However,
only activated/open and faulty interlock sensors are shown. If the window is empty, no interlock has
been activated. The log ID is the logical number of the configured input. The FTL ID is only used by the
office to identify the interlocks.
When an interlock sensor is active or faulty, the vehicle must not be moved. In this
case, System 3003 only controls one logical output. The setup person must ensure
that the output is used correctly. See also the service and configuration instructions.
7.3
Vehicle-office connection test
If TCP communication has been configured as the office connection and the vehicle is connected to the
Internet, then the connection to the office can be tested. To do this, touch the "Connection test" softkey
(configurable). A test message is then sent to the office.
