Mobile Computer
MC 92N0
ex
Type 17-A1A.-………… and Type B7-A2A.-…………
Operation
Technical data subject to change without notice.
Revision B / 03/2019
59/79
US and Canada
Co-located statement
To comply with FCC RF exposure compliance requirement, the antenna used for this
transmitter must not be co-located or operating in conjunction with any other
transmitter/antenna except those already approved in this filling.
Handheld Devices
This device was tested for typical body-worn operation. Use only BARTEC tested and
approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use
of third-party belt-clips, holsters, and similar accessories may not comply with FCC RF
exposure compliance requirements, and should be avoided.
The MC 92N0
ex
should only be worn on the body when switched off.
Handheld devices
To comply with the FCC guidelines for high frequency devices, the aerial of the transmitter
should be used in the direct vicinity of, or in an operation unit with, other transmitters/aerials
with the exception of those approved in this document.
SD card
The SD card slot provides a secondary, non-volatile memory. The slot is under the keypad
of the MC 92N0
ex
. Further information is provided in the documentation supplied with the
card. Observe the manufacturer’s recommendations on use.