Commissioning
Mobile Computer
MC 92N0
ex
Type 17-A1A.-………… and Type B7-A2A.-…………
42/78
Technical data subject to change without notice..
Revision B / 03/2019
8.
Check that the keypad is mounted correctly.
9.
Tighten the screws (torque = 0.452 Nm / torque = 4.0 in-lbs); 0.5 Nm is advisable.
Attention: Always use the correct torque.
10.
After the exchange of the keyboard a cold boot (see chapter 7.1 "Resetting the
MC 92N0
ex
") must be performed.
11.
The current drivers are installed on the unit and initialized automatically by the cold
boot.
ATTENTION
Incorrect handling may cause damage to property!
Do not apply more than 0.5 NM or 4 in-lbs of torque when tightening the keypad
screws.