Basic Safety Information
4.3" Industry Mobile Computer
- Lumen X4
Type B7-A2P4-.…/……..
EN 4/70
Subject to technical changes.
03/2016
1.6.2
Inspection
According to EN/IEC 60079-17 and EN/IEC 60079-19, the operator of electrical systems
in potentially explosive atmospheres is obliged to have these inspected by an electrician
to ensure correct condition.
1.6.3
Repairs
Repairs to explosion-protected devices may only be performed by authorised personnel
with original spare parts and according to the state of the art. The applicable provisions
must be observed in this respect.
1.6.4
Commissioning
It must be checked that all components and documents are available before
commissioning.
1.7
Labelling, test certificate and standards
Labels on explosion protection and the test certificate are attached to the Industry Mobile
Computer. See Chapter 3 “Technical data” with respect to labelling.
The guidelines and standards applicable to the Industry Mobile Computer for devices and
protected systems for intended use in potentially explosive atmospheres are provided in
Chapter 3 “Technical data”.
1.8
Warranty
WARNING
No changes or retrofits may be made without the written consent of the
manufacturer.
If non-specified components are used, the explosion protection will no longer be
guaranteed. In the case of externally procured parts, it is not guaranteed that these
have been designed and manufactured in accordance with their load and requisite
safety.
Contact the manufacturer before any changes or retrofits to receive a release.
Only use original spare and wearing parts.
The manufacturer shall exclusively assume the complete warranty only for spare parts
ordered from him.
