Installation Instruction
(Translation)
RFID UHF Add-On Module
Type B7-A2Z0-0032
Technical data subject to change.
08/2016
EN 6/11
Installation of RFID UHF Add-On Module
Only assemble/dismantle the RFID
UHF Add-On Module outside the
potentially explosive atmosphere.
Only use the RFID UHF Add-On
Module for the purpose that they have
been tested and certificated by
BARTEC.
Avoid data losses!
Do not just switch the Agile X
using the "ON/OFF" switch.
1.
Shut the Agile X down using the
operating system.
2.
Place the Agile X on the display
side, taking care that no parts
nearby scratch the screen.
3.
Remove the cover on the extension
interface.
4.
Remove the top two screws on the
I/O interface cover.
5.
Unpack the RFID UHF Add-On
Module (the screws supplied for
mounting are in the packaging).
6.
Place the RFID UHF Add-On
Module on the extension interface.
