Installation Instruction
(Translation)
RFID UHF Add-On Module
Type B7-A2Z0-0032
Technical data subject to change.
08/2016
EN 8/11
Setting up / activating the RFID UHF Add-On Module
Switching the Agile X on.
(1)
Press the ON/OFF button for three
seconds.
Activating the RFID UHF Add-On
Module.
(2)
Click on "Hottab" on the start
screen to start the application.
(3)
Click in the menu on the option
"Device ON/OFF".
(4)
Select "Ext. Module" to active the
extension interface.
(orange = ON; White = OFF)
(5)
UHF power set to ON.
In up-to-date versions of the operating
system the driver has already been
integrated in the image. With older
versions the driver must be installed
manually using the device manager.
ATTENTION
There is a risk of overheating during
continuous use of AutoScan!
Switch over to Single Scan.
The read function can be
started using the "F2" function
button or the "Send" button.
Affects "Hottab" versions from
1.40 and higher. Older versions
can be updated.
