Basic safety information
Industry Tablet PC 10.1"
Agile X IS
Type 17-A1B*-****/********
EN 4/43
Subject to technical changes.
05/2017
1.6
General safety information for operation
1.6.1
Maintenance
The pertinent erection and operating provisions for electrical systems must be
observed! (E.g. Directive RL 2014/34/EU, BetrSichV and nationally applicable
ordinances EN 60079-14, IEC 60079-14 and the series DIN VDE 0100)!
Observe the national waste disposal regulations when disposing of materials.
1.6.2
Servicing
No constant servicing will be necessary if operated correctly under consideration of the
assembly instructions and environmental conditions. See Chapter “Service, inspection,
repair” in this respect.
1.6.3
Inspection
According to EN/IEC 60079-17 and EN/IEC 60079-19, the operator of electrical
systems in potentially explosive atmospheres is obliged to have these inspected by an
electrician to ensure correct condition.
1.6.4
Repairs
Repairs to explosion-proof equipment may only be performed by persons authorized by
BARTEC, who must employ the latest technological practices, observe the
manufacturer's instructions and use only original spare parts. The applicable
regulations are to be observed here.
1.6.5
Commissioning
It must be checked that all components and documents are available before
commissioning.
1.7
Labelling, test certificate and standards
The device features an explosion protection label, as well as a test certificate. For an
explanation of the symbols and information used, see chapter 4 "Technical data".
The Tablet PC series complies with Directive 2014/34/EU on equipment and protective
systems intended for use in potentially explosive atmospheres (ATEX Directive). For
information on standards that must be observed, see chapter 3 "Explosion protection
and approvals".
1.8
Warranty
WARNING
Explosion protection cannot be guaranteed if non-specified components are
used.
Do not make any changes or perform any reconstruction work on the device.
Use only original spare parts.