Industry Tablet PC 10.1" - Agile X IS
Type 17-A1B*-1***/********
Service, inspection and
repairs
Subject to technical changes.
05/2017
EN 39/43
9.
Service, inspection and repair
Service, inspection, and repair of tablet PCs may be conducted exclusively by trained
and qualified staff! The staff who is familiar with the service, inspection, and repair of
the tablet PCs, has been informed about the risks and has the qualifications necessary
for this work.
9.1
Service intervals
The mechanical state of the device should be regularly checked. The service intervals
will depend on the ambient conditions. Regular servicing is not necessary if the device
is correctly operated in accordance with the installation instructions and under
appropriate consideration of the ambient conditions.
9.2
Inspection
According to EN/IEC 60079-17 and EN/IEC 60079-19, the owner/operator of electrical
plants in potentially explosive atmospheres is obliged to have these plants checked by
an electrician to ensure that they are in a correct condition.
9.3
Service and repair work
In addition to the standards EN/IEC 60079-17 and EN/IEC 60079-19 also apply to the
servicing and repair as well as the testing of accompanying operating devices.
Work connected with assembly/dismantling, operation and servicing may only be
conducted by trained staff. All statutory requirements and other binding guidelines on
occupational health and safety, accident prevention and environmental protection must
be observed.
9.3.1
Information on sending in for repairs
The following information is required for the repair:
−
Serial number of the device, see label for series number.
−
Model number or product name, see type plate
−
Software type and version number from the system information in system control