Barrus ShireZ Electric 6HP, Operator'S Manual

Page: 40 / 97

RDG603A74 - Issue 4 Page 40 of 97
•
Reposition the trim pin in the selected position and replace the R clip.
To put the electric outboard in the down position:
•
Tilt the leg slightly up and lift the release lever up (circled, Figure 34 ). Slowly, tilt the
engine down and release the lever.
Figure 34: Outboard release lever (Left is unlocked, right is locked)
•
Set the tilt lock lever to the locked position.
When running the tilt lever must be in the locked position. Failure to do this
will result in the outboard leg lifting out of the water if reverse (astern) direction is
engaged. This is potentially very dangerous as the propeller will be rotating.