Barrus ShireZ Electric 6HP, Operator'S Manual

Page: 36 / 97

RDG603A74 - Issue 4 Page 36 of 97
2. Starting Procedure (Outboard Motor with tiller control)
•
Attach the magnetic safety lanyard to the tiller arm of the outboard ( Figure 29 ).
Figure 29: Safety Lanyard attached to the stop switch
•
Attach the other end of the safety lanyard to the
operator’s life jacket or leg.
The outboard will not operate if the safety lanyard is not attached.
•
Make sure the speed control twist grip is in the neutral position.
•
Select the mode you want to use (Sport, Normal or Economic) on the mode switch
Note : The outboard has 3 modes (Sport (S), Normal (N) and Eco (E)), which have
different speeds that are a percentage of the maximum throttle. The default settings
are: Economic 25%, Normal 60% and Sport 100%. These can be altered using the EZ
Outboard Application (See 7. Application Downloads and Information).
•
Check that the speed control twist grip is in the
neutral position (‘N’).
•
Press the power button. The light on the power button will illuminate green and the
cooling pump will switch on.
•
Slowly twist the speed control twist grip to start the outboard in the direction required
(Turn anti-clockwise for forward
(‘F’) and clockwise for reverse (‘R’)).
•
To increase the speed, twist the speed control twist grip further.