INSTALLATION INSTRUCTIONS
10070166 Rev 4 - 04/19
3
SELF-TEST/SELF-DIAGNOSTIC
OPERATING INSTRUCTIONS
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Installation
I M P O R T A N T:
ONCE ALL EMERGENCY LAMPS HAVE BEEN CONNECTED TO THE UNIT EQUIPMENT, APPLY
NORMAL AC POWER AND CHARGE FOR 24 HOURS.
Operation
The purpose of this option is to provide self-testing and self-diagnostic capabilities to the unit equipment. At
predetermined intervals, the unit equipment will automatically switch into battery mode. The unit equipment will also
perform various self-diagnostic tests of the unit. Visual signaling will alert maintenance personnel to a fault of the unit
equipment electronics, emergency lamp(s), battery and/or battery charger. The circuitry continuously monitors the
operating condition of the unit equipment and battery charging circuit/battery supply voltage. Refer to table 1 for units
equipped with a tri-color LED indicator. Refer to table 2 for units equipped with a numeric indicator.
Self Test Features
• The unit equipment will automatically switch to battery mode every 28 days for a period of 1 minutes.
• The unit equipment will automatically switch to battery mode every 6 months for a period of 90 minutes.
Manual Test Features
• Press the TEST BUTTON momentarily for a 2 second test. (Tri-Color LED unit only)
• Press the TEST BUTTON until the LED turns ORANGE or Numeric display shows “7” for a manual 1 minute test.
• Press the TEST BUTTON until the LED flashes RED/GREEN, (Tri-Color LED unit only) for manual 90 minute test.
LED Indication
Steady
Pulse
Steady
Pulse
Steady
Pulse
LED Color
LED Color
Green
Green
Red
Red
Orange
Orange
Red/Green
Unit Condition
Float Charge
Hi-Rate Charge
Low Batt Voltage
Emer Lamp Failure
No AC Power
Charge Failure
1 Minute Test
Batt Disconnected
90 Minute Test
Comment
Batt Fully Charged
Batt Under High-Rate Charge
Replace Battery
Check AC Connection
Replace Transformer
1 Min Test Every 28 Days
Check Batt Connections
90 Min Test Every 6 Months
Replace Damaged or
Missing Lamps
Table 1 - Tri-color LED Indicator
CHARGED
0 Float charging
CHARGING 1 Hi rate charging
EM/BATT 2 Discharging
CHRG FAIL
3 Charger failure
DISC BATT
4 Battery not connected
LAMP FAIL 5 Lamp failure
LOW BATT 6 Low battery voltage
1 MIN TEST 7 Manual testing
90 MIN TEST 8 Self testing
STATUS LEDGE Condition
Table 2 - Numeric Indicator
Numeric Display
Tri-Color LED
CRL SERIES
800.533.3948 • www.barronltg.com
