Selects which type of GPS receiver is to be used for position information, either the
internally fitted GPS receiver option Barrett P/N’s BCA90030 or BCA95002 or an external
GPS receiver connected to the NMEA 0183 compliant port on pins 8 and 20 of the auxiliary
connector. Note:- when an external GPS is connected the functions normally associated
with pin 8, linear amplifier ALC input and pin 20, auxiliary digital input are disabled and not
available. Note: the external GPS receiver must be outputting the NMEA 0183 RMC
sentence to be compatible with the Barrett 950.
... selects internal GPS receiver, if the internal GPS receiver is installed
... selects external GPS receiver, if an external GPS receiver is connected to the NMEA port
on the transceiver’s auxiliary connector
... select if 500Hz filter option is fitted to the transceiver, this will cause the hardware to
select this filter in AFSK mode.
… select when 500Hz filter option
to the transceiver.
GPS type
.
500Hz Filter - hardware option enable
is not fitted
BARRETT 950 HF TRANSCEIVER
PAGE 60
