When the transceiver has a selcall enabled channel selected the transceiver monitors
incoming selective calls (selcall’s). (If more than one channel is to be monitored then the
scan function should be used.)
If an incoming selcall's destination ID matches the unit's selcall ID an audible alarm is
sounded, mute is opened and the display shows the call as follows:
The alarm will sound for thirty seconds and then time out. To stop the alarm before the time
out and acknowledge the call press PTT or any key. If the alarm times out the message
"Call received" will be displayed periodically on the bottom line of the display as follows:
To cancel the "Call received" message either press the clear key or send a selcall back to
the calling transceiver.
If the first digit of the incoming call's destination ID is the same as the unit's selcall ID and
the last three digits of the destination ID are all zero (eg: 9000) then the mute is opened and
the display shows the following:
The mute will stay open for 20 seconds then time out. Once timed out the "Call received"
message will not be displayed.
Receiving a selcall
Receiving a selcall directed to your transceiver
All call
BARRETT 950 HF TRANSCEIVER
PAGE 14
