Enter a new frequency, using the numeric keys, to set the second scan limit boundary - the
example below shows Scan Limit 2 set to 30 MHz:-
... until display below appears
Enter the step increment required in Hz i.e. entering 100 will select scan increments of
100 Hz.
... the display will revert to the tuning receiver display :-
... will commence scanning using the parameters set above:-
The transceiver will halt scanning for the following reasons:
Signal Strength Level (SSL) mute is selected and a signal with a level greater
than the pre-set threshold is received.
Audio (syllabic) mute is selected and a voice signal is detected.
-
-
BARRETT 950 HF TRANSCEIVER
PAGE 47
