Baroness SP05, Service Manual

Page: 92 / 142

Adjustment
Forward/reverse pedal proximity switch
Adjust the position of the forward/reverse pedal
proximity switch so that gap A is 5 mm (0.20 in)
or less when the forward and reverse pedals are
in the neutral position. (See “Forward/reverse
pedal proximity switch_001.”)
Loosen the bolts (4) and adjust the sensor
mounting plate (5) by moving it parallel to the
plastic magnet (2).
Tighten the bolts (4) while taking care not to
move the sensor mounting plate (5).
Tighten the bolts to a torque of 7 N-m (61.96
lb-in).
1
2
5
4
3
A
5dzl8y-001
Forward/reverse pedal proximity switch_001
1 Forward/reverse pedal
2 Plastic detection magnet
3
Forward/reverse pedal proximity
switch
4 Bolts
5 Sensor mounting plate
Brake pedal switch
Adjust the brake pedal switch by loosening the
nuts (4) so that A is 2 mm (0.079 in) or more
when the parking brake is not engaged (2), and
B is 6 mm (0.24 in) or less when the brake pedal
(5) is fully depressed (3).
Tighten the nuts (4), taking care not to move the
position of the adjusted pedal brake switch.
1.
2.
5
1
2
3
5
5
A
B
4
4
4
9sbu2p-001
Brake pedal switch_001
1
When the brake pedal is released
(non-contact)
2 When the parking brake is set
3
When the brake pedal is fully
depressed
4 Nuts
5 Brake pedal
A 2 mm (0.079 in) or more
B 6 mm (0.24 in) or less
Electrical components
Warning
When servicing electrical components, be sure
to disconnect the negative battery cable.
Safety switches
The seat switch is “OFF” when the seat is
occupied.
The brake pedal switch is “ON” when the
brake pedal is depressed. 1.
2.
Electrical system
Page 6-8 Adjustment