Baroness SP05, Service Manual

Page: 78 / 142

2
4
6
5
7 2
2
3
3
1
1
ai9flg-001
Removal of drive switching valve_001
1 Hydraulic hose
2 Elbow
3 Adapter
4 Bolt
5 Sub-plate
6 Drive switching valve
7 Switching valve mount
Fitting of drive switching valve
Mount on the switching valve mount (7) the
drive switching valve (6) which was
removed together with the sub-plate (5).
(See “Removal of drive switching
valve_001.”)
Fit with the bolt (4).
Fit the elbow (2) and the adaptor (3).
Fit the hydraulic hose (1).
Caution
After fitting, check for hydraulic oil leakage at
each part.
Refer to the tightening torque list. We assume
no responsibility for problems caused by
abnormal tightening, tightening with excessive
torque or the like of.
Oil cooler
Removal of oil cooler
Turn the cover stopper and open the rear
cover.
1.
2.
3.
4.
1.
Remove the hydraulic hose (1) fitted to the
oil cooler (4).
Remove the fitting bolt (3) of the oil cooler
bracket (2).
Remove the oil cooler (4) together with the
oil cooler bracket (2).
4
1
3
2
pl9ba8-001
Removal of oil cooler_001
1 Hydraulic hose
2 Oil cooler bracket
3 Fitting bolt
4 Oil cooler
Fitting of oil cooler
For fitting, follow the opposite procedure of
removal.
Caution
After fitting, check for hydraulic oil leakage at
each part.
Refer to the tightening torque list. We assume
no responsibility for problems caused by
abnormal tightening, tightening with excessive
torque or the like of.
In-line check valve
Removal of in-line check valve
Turn the cover stopper and open the rear
cover.
Remove the hydraulic hose (1) fitted to the
in-line check valve (2).
Remove the elbow (4) and the bushing (3).
Loosen the in-line check valve (2) and
remove.
2.
3.
4.
1.
2.
3.
4.
Hydraulic system
Page 5-40 Removal and installation of each section