Baroness SP05, Service Manual

Page: 6 / 142

Safety instruction
Safety instructions
Danger Danger
This machine is designed to ensure safe
operation and has been tested and inspected
thoroughly before shipment from the factory.
The machine is equipped with safety devices to
prevent accidents. However, whether the
machine demonstrates its original performance
level depends on the manner in which it is
operated and handled, as well as the manner in
which it is managed on a daily basis.
Inappropriate use or management of the
machine may result in injury or death. Observe
the following safety instructions to ensure safe
operation.
Before operating the machine
Before operating this machine, be sure to
read the owner’s Manual and make sure that
you understand its content thoroughly. Learn
how to operate each part and stop the
machine in an emergency, and make sure
that you are familiar with the safety
indications.
If the operator cannot understand the
Owner’s Manual, it is the owner’s
responsibility to thoroughly explain its
content.
Never allow children to operate or service
the machine. Never allow adults that are
unfamiliar with the instructions to operate or
service the machine. Follow the age limit
specified by the local government.
Do not operate the machine under the
influence of alcohol or drugs or if you are
pregnant.
Never operate the machine while people,
especially children, or pets are nearby.
Keep in mind that the owner, operator, and
mechanic are responsible for preventing
accidents, and accidents can be prevented
with the cooperation of all.
All operators and mechanics should receive
proper training. The owner is responsible for
ensuring that the operators receive training 1.
2.
3.
4.
5.
6.
7.
and the following must be thoroughly
understood:
The basic safety precautions for operating
a ride-on bunker rake.
Controlling the machine by applying the
brake when it begins to slide on a slope is
difficult.
The main reasons why it may not be
possible to control the machine on a slope
are:
Insufficient tire grip
Driving too fast
Inadequate brake adjustment
The use of a model that is unsuitable for
the job
Lack of awareness of the ground
conditions (bumpy, icy, muddy), in
particular, of the angle of gradient
Use clothing that is suitable for the job. Wear
equipment such as a helmet, protective
glasses, protective footwear, long pants and
earmuffs. Do not wear a towel around your
head or waist, or a scarf around your neck.
Make sure that the protection guard and
covers are properly installed and
undamaged.
The safety labels and operation labels
should be preserved in their entirety. If they
are damaged, become dirty, or peel off,
please replace them with new ones.
Tighten any nuts, bolts, or screws that
become loose to ensure that the machine is
always operated under safe conditions.
Before starting, thoroughly check that the
area where the machine is to be used is free
of dangerous objects that can be thrown by
the machine, such as rocks and wires.
Repair any sensors that are malfunctioning
before operating the machine.
Check that the interlock system, safety
guards, and covers are installed correctly
and that they function properly. Repair these
parts if there is a malfunction before
operating the machine.
If the brake operation is faulty or the parking
brake lever has noticeable play, be sure to
adjust or repair them before operating the
machine.
Do not use this machine if it has been
modified.
[1]
[2]
-
-
-
-
-
8.
9.
10.
11.
12.
13.
14.
15.
16.
Safety
Page 1-2 Safety instruction