Maintenance Schedule
LS
●・・・
Inspect, adjust, supply, clean (first time)
○・・・
Inspect, adjust, supply, clean
▲・・・
Replace (first time)
△・・・
Replace
Maintenance Item
Before Work
After Work
Every 50 hrs.
Every 500 hrs.
Every year
When Required
Remarks
Mower unit
Check engage blades
○
Check mowing height
○
Check of CR brush belt
○
Clean inside of CR brush belt cover
○
Grease
○
Grease spindle bolt of reel housing
○
○
Every 500 hours or every year
whichever comes earlier, and
when replacing a reel cutter
additionally
Backlap blades
○
Engage blades
○
Adjust mowing height
○
Adjust cutter adjustment spring
○
Adjust reel cover (Variable type)
○
Adjust CR brush
○
Adjust rear scraper
○
Adjust drive belt tension of CR brush
○
Regrind reel cutter
○
List of Adjusted Values
Cutter adjustment spring
40.0 mm (1.575 in.)
Length of spring coil
CR brush
0 - 1.0 mm (0 - 0.039 in)
Gap between brush and rear
roller
Front scraper
2.0 - 3.0 mm (0.079 - 0.118 in)
Gap between scraper and outer
diameter surface of roller
Rear scraper
2.0 - 3.0 mm (0.079 - 0.118 in)
Gap between scraper and roller
CR brush drive belt
5.0 - 6.0 mm (0.197 - 0.236 in)
Slack when belt pressed with 10.0
N (1.0 kgf) at the middle point
between pulleys
LS60
・
LS62
・
LS66
Appended Table
Page 6-6
Maintenance Schedule
