Roller
Inspection of Rollers
Make sure that there is no abrasion nor
adhesion of the roller.
Make sure that there is no wear of the roller
shaft.
Make sure that there is no wear nor
damage of the oil seal.
Make sure that there is no wear nor rust of
the bearing.
Make sure that there is no play in the roller
shaft.
Wheel
Inspection of Wheel
Make sure that there is no wear and
adhesion of the wheels.
Make sure that there is no play of the wheel
shaft.
Make sure that there is no wear, damage
and rust of the wheel shaft.
CR brush
Inspection of CR Brush
Note:
Depending on the specifications, this function
may not be available.
Make sure that there is no abrasion nor
adhesion of the brush.
Make sure that there is no wear of the
brush shaft.
Make sure that there is no abnormality in
the brush.
Make sure that there is no play in the fit of
the bearing and the housing.
Make sure that there is no play in the brush
shaft.
1.
2.
3.
4.
5.
1.
2.
3.
1.
2.
3.
4.
5.
Scraper
Inspection of Scraper
Inspection of Front Scraper
Note:
Depending on the specifications, this
function may not be available.
Make sure that there is no damage nor
deformation of the scraper.
Make sure that there is no contact
between the scraper and roller.
Inspection of Rear Scraper (Wire Type)
Note:
Depending on the specifications, this
function may not be available.
Make sure that there are no breaks or
sagging in the scraper (wire).
Make sure that there is no contact
between the scraper and roller.
Bolts and Nuts
Inspection of Bolts and Nuts
Important
The bolts and nuts may be loosened at the
earlier stage of the use.
Be sure to retighten or replace before
operating the machine whenever there is any
abnormality.
Check the bolts and nuts for looseness and
coming off.
Check the bolts and nuts for cracks and
damages.
Check the bolts and nuts for rust.
Check around the bolts and nuts for traces
of rust fluid.
Check for unequal bolt length.
Check the bolts and nuts for stripped
threads and abrasion.
￭
1.
2.
￭
1.
2.
1.
2.
3.
4.
5.
6.
Handling Instructions
LS60
・
LS62
・
LS66
Handling Instructions
Page 4-3
Inspection and Cleaning
